|
|
Jetway NF9U-2930 Mini-ITX Fanless Intel Celeron N2930 SoC Designed for POS: JNF9U-2930
|
|
Images shown for reference only
|
|
|
Bay Trail, 2 LAN, SATA, 2 Display, HDMI, VGA, LVDS, mSATA, mini-PCIE, PCIE x1, 6 x COM, Parallel, PS2, RJ11 (+12V/+24V), Audio, 9V-24V DC in or alternate 2-pin internal Power connector
|
|
|
|
| Shipping Extra
|
|
ATACOM Part #: IMBM_JETA_MM_01
Manufacturer Part#:NF9U-2930 |
|
Price: $
|
|
|
|
|
| | Overview | Form Factor | | Dimensions | - Mini-ITX ( 170 x 170mm) | | Processor System | | CPU | - Intel® Baytrail-M/D/I Processor | | Core Number | - (By CPU) | | Max Speed | - (By CPU) | | L2 Cache | - (By CPU) | | Chipset | - N/A | | BIOS | - AMI 64Mb Flash ROM | | Expansion Slot | | PCI | - 0 | | Mini-PCIe | - 1 (Half size) | | mSATA | - 1 | | PCIe | - 1 | | CFast Card Socket | - 0 | | CF Card Socket | - 0 | | Memory | | Technology | - 1 * Single Channel DDR3L 1333/1066 MHz SDRAM | | Max. | - 8GB | | Socket | - 1 * SO-DIMM | | Graphics | | Controller | - Intel® HD Graphics | | VRAM | - Shared Memory | | VGA | - 1 (Support max resolution 2048X1536) | | LVDS | - 1 * Onboard 24-bits dual channel connector (resolution 1920x1080) | | HDMI | - 1 (resolution1920x1080) | | DVI-I | - No | | DisplayPort | - No | | MultiDisplay | - Yes (Dual Display) | | Ethernet | | Ethernet | - 10/100/1000 Mbps | | Controller | - GbE LAN: RTL8111G | | Connector | - 2 * RJ 45 | | SATA | | Max Data Transfer Rate | - 2 * SATAII (3.0Gb/s) | | Rear I/O | | VGA | - 1 | | DVI-I | - 0 | | HDMI | - 1 | | DisplayPort | - 0 | | Ethernet | - 2 | | RJ11 | - 1 | | USB | - 4 (3 * USB 2.0 + 1 * USB3.0) | | Audio | - 2 (MIC/Line-out) | | Serial | - 1 (RS-232/422/485 with 5V/12V selectable header) | | Parallel | - 1 | | eSATA | - 0 | | PS2 | - 1 | | DC-input | - 1 | | Internal Connector | | USB | - 4 ( 2 * USB 2.0 via 9 pin header ) | | PS2 | - 0 | | LVDS / inverter | - 1 | | VGA | - 0 | | Serial | - 5 (5 x RS-232 with 5V/12V selectable header) | | SATA | - 2 * SATAII (3.0Gb/s) | | mPCIe | - 1 | | Parallel | - 0 | | mSATA | - 1 | | CIR | - 0 | | GPIO 8-bit | - 4in / 4 out | | Chassis intrusion | - 1 (via 2pin header) | | Audio Header | - 1 | | Watchdog Timer | | Output | - From Super I/O to drag RESETCON# | | Interval | - 256 segments, 0,1,2…255sec/min | | Power Requirements | | Input PWR | - 9~24V DC-In | | Power On | AT/ATX Supported
- AT : Directly PWR on as Power input ready
- ATX: Press Button to PWR on after Power input ready | | Certifications | | Certifications | - CE, FCC, RoHS, REACH | | Environment | | Temperature | - Operating: 0℃– 60℃ | | - Storage: -20℃– 85℃ | |  |  | | Jetway NF9U-2930 Mini-ITX Fanless Intel Celeron N2930 SoC Designed for POS - Intel® Baytrail-M/D/I Processor
- Integrated Intel® Gen7 Intel® Graphics DX 11*, OGL3.0
- Supports Single Channel DDR3L 1333/1066 MHz, 1 x SO-DIMM, up to 8GB system memory
- 1 x RJ11 port, 1 x parallel port
- 1 x VGA, 1 x HDMI, 1 x Dual Channel 24-bit LVDS
- 1 x USB 3.0, 7 x USB 2.0, 2 x SATAII
- 1 x mini-PCIe, 1 x PCIe x1 slot
- Gigabit LAN : 2 x LAN
- Support CPU Over-Temperature protection
- Support CPU Over-Current/Under Voltage protection
- Support DRAM Over-Current/Under Voltage protection
- Support CPU Smart Fan
- Support DC Fan
|
|
