Molex 39-01-2200 compatible, two 3.5” drive power connectors (PATA and SATA) and one optional P4-12V 4 connector (mini-fit JR 4p). Header and mating connector for the removable cable
Typical configuration The picoPSU-80 has been tested with all mini-ITX board (VIA C3, VIA C7, low power AMD and Intel Atom) under virtually any disk / floppy / CDROM configurations. Additionally, the PICOPSU-80 can power low boards equipped with an 12VATX 4 pin connector (additional cable required). NOTE: The hard drive cable harness can be disconnected in case the user does not need any peripheral. Additionally, the cable harness can be made to any length or output connector type provided that the max load does not exceed 3A for GND return. Please look under specifications for the mating connector type.