12V regulated, min=1A, max=10A (load dependent). Overvoltage shutdown will occur at ~13-13.5V.
Size
44.5mm(L) * 20mm(W) * 30mm (H) (1U compliant)
Typical configuration The picoPSU-90 has been tested with all mini-ITX board (VIA C3, VIA C7, low power AMD and Atom) under virtually any disk / floppy / CDROM / PCI configuration. Additionally, the PICOPSU-90 can power low boards equipped with an 12VATX 4 pin connector. NOTE: The hard drive cable harness can be disconnected in case the user does not need any peripheral. Additionally, the cable harness can be made to any length or output connector type provided that the max load does not exceed 3A for GND return. Please look under specifications for the mating connector type.