picoPSU-160-XT, 160W / 200 Watt peak, 12V input DC-DC ATX Power Supply

Images shown for reference only

picoPSU-160-XT, 160W / 200 Watt peak, 12V input DC-DC ATX Power Supply

Shipping Extra

ATACOM Part #: IPMD_ATAC_16_02

Price: $

Model	PSU-160-XT
Power Rating	Volts (V) Max Load (A) Peak Load (A) Regulation % 5V 8A* 10A +/- 1.5% 5VSB 1.5A 2A +/- 1.5% 3.3V 8A* 10A +/- 1.5% -12V 0.05A 0.1A +/- 5% 12V 8A 15A Switched input
Input Requirements	12V regulated, min=1A, max=16A (load dependent). Overvoltage shutdown will occur at ~13-13.5V
Size	44.5mm(L) * 20mm(W) * 30mm (H) (1U compliant)

Typical configuration
The picoPSU-160-XT has been tested with all mini-ITX board (VIA C3, VIA C7, low
power AMD and Intel Atom) under virtually any disk / floppy / CDROM
configurations. Additionally, the PICOPSU-160-XT can power low boards equipped
with an 12VATX 4 pin connector (additional cable required). NOTE: The hard drive
cable harness can be disconnected in case the user does not need any peripheral.
Additionally, the cable harness can be made to any length or output connector type
provided that the max load does not exceed 3A for GND return. Please look under
specifications for the mating connector type