IEI AUPS-A10-R11 VESA 75 DC 12V input 60W UPS module with 7.4V 3800mAH 2S2P Li-Ion battery R11

Images shown for reference only

Shipping Extra

ATACOM Part #: IPMD_IEIX_75_01

Manufacturer Part#:AUPS-A10-R11

Price: $

Input	Input voltage Uinated/range	DC +12V
	Input current rated	1. Adapter is 12V--6A (Load is 60W)
	Input current rated	2. Battery is 6V--12A (Load is 60W)
	Standby power consumption	0.3A (0.2A if Network Management disabled)
	Operation with charging current	500mA
	Operation with charging power consumption	6W
	Charging time with system ON/OFF	8hrs / 2hrs (Battery empty)
Output	Output voltage for normal operation	DC +12V +/-5%
	Output voltage for battery operation, approx.	6~8.4V DC6 V (exhaustive discharge protection)
	output current	0A~5A
	Efficiency(nominal operation)/power lossat Vin=12V, Iout=80% of full loading	89%
Protection	short-circuit protection	Yes
	Exhaustive discharge protection	1.Battery low is 10% of Battery capacity
		2.Shuntdown 5% of Battery capacity (Default)
		3.The end of Battery discharge voltage is 6V
	EMC / Safety certification	CE, FCC
Weight	1.2kg
Storage Temperature	-20℃~50℃
Operation Temperature	0℃~40℃
Dimensions	152mm(L) * 96mm(W)*28mm(H)
LED Indicator	Green - DC power input
	Yellow - Battery charging
	Orange - Bettery discharging
Monitoring	Ethernet interface	Web-based, specification 10/100Mbps with RJ-45 connection, Cat. 5 cable
Monitoring	USB interface	PC-capable, specification 2.0 with full speed, i.e. 2 Mbit/s. Standard 4-core shielded cable, USB Series "mini B"connector to DC-UPS
Battery	Battery Model Name	BAT-LI-2S2P3800
	battery type	Li-Ion 2S2P 7.4V
	Battery capacity	8.4V
	The end of discharging voltage	5.6V
	Suggestive charging current (Max.)	2A
	System continuous discharging current(Max)	7.6A
	The end of charge condition	250mA/1Min
	Discharge protection	Under Voltage Protection / Over Current Protection
	Charge protection	Over Voltage Protection / Over Current Protection
	Ambient temp	0°C~40°C
	Storage Tem	-20°C~60°C
	Self-discharge rate	340uA~440uA
	Dimensions	139mm(L) * 47mm(W)*26mm(H)
	Weight	236g
	Cycle life	300 charge/discharge cycles
	Backup	60W/10Min
	Safety class	CE, FCC

IEI AUPS-A10-R11 VESA 75 DC 12V input 60W UPS module with 7.4V 3800mAH 2S2P Li-Ion battery R11

• 60W (5A @ 12V)output
• 28Wh or 56Wh, for more than 140 minutes operation time (dependent on panel PC power requirements)
• Rugged metal enclosure for standard VESA 75/100 mounting
• Web-based, remote network management, no software installation required
• Local PC-based monitoring software for input detection and battery status monitoring
• Auto shut down when battery low
• Remote DC output ON/OFF switch for external switch installation
• Provides stable power to the PC during line sags and spikes and absorbs power surges and transients,protecting expensive equipment