|
Gigabyte Motherboard GA-N3050N GSM PLUS Dual-Core Celeron N3050 DDR3L PCI Express SATA Mini-ITX Ratail
|
|
Images shown for reference only
|
|
|
|
|
|
Shipping Extra
|
|
MBMI_GIGA_CE_20
Manufacturer Part#:GA-N3050N GSM PLUS |
|
Price: $188.95
|
|
|
|
|
|
CPU 1.Built in with an Intel Dual-Core Celeron N3050 SoC (1.6 GHz) (Do not disassemble the onboard SoC and the heatsinks by yourself to avoid damage to these components.) 2.TDP 6W 3.L1/L2 varies with CPU
|
|
Memory 1.2 x DDR3L DIMM sockets supporting up to 8 GB of system memory (If only one memory module is to be installed, be sure to install it in the SODIMM1 socket.) 2.Dual channel memory architecture 3.Support for DDR3L 1333/1600 MHz memory modules (Due to an SoC limitation, if a 1333 MHz memory is installed, it will be downgraded to 1066 MHz.) 4.Support for non-ECC memory modules
|
|
Onboard Graphics Integrated in the SoC: 1.1 x D-Sub port, supporting a maximum resolution of 1920x1200 at 60 Hz 2.1 x HDMI port, supporting a maximum resolution of 3840x2160 at 30 Hz
|
|
Audio 1.Realtek ALC269 codec 2.High Definition Audio 3.2-channel
|
|
LAN 1.Realtek RTL8111HS GbE LAN chip (10/100/1000 Mbit)
|
|
Expansion Slots 1.1 x PCI Express x1 slot 2.1 x Mini PCIe slot (half size) (MIN_PCIE) (The PCI Express slots conform to PCI Express 2.0 standard.)
|
|
Storage Interface Integrated in the SoC: 1.2 x SATA 6Gb/s connectors ( The M.2 slot shares bandwidth with the SATAIII_1 connector. The SATAIII_1 connector becomes unavailable when an M.2 SSD is installed. ) 1 x M.2 slot (B/M key, type 2242 SATA and PCIe x1 SSD support) (M2_M)
|
|
USB Integrated in the SoC: 1.4 x USB 3.0/2.0 ports (2 ports on the back panel, 2 ports available through the internal USB header) 2.6 x USB 2.0/1.1 ports (4 ports on the back panel, 2 ports available through the internal USB header)
|
|
Internal I/O Connectors 1.1 x 4-pin ATX 12V power connector 2.1 x CPU fan header 3.1 x system fan header 4.1 x front panel header 5.1 x front panel audio header 6.2 x SATA 6Gb/s connectors 7.1 x M.2 slot 8.1 x SATA power connector 9.1 x battery cable header 10.1 x USB 3.0/2.0 header 11.1 x USB 2.0/1.1 header 12.1 x Trusted Platform Module (TPM) header 13.4 x serial port headers 14.1 x COM1 function select jumper 15.1 x parallel port header 16.1 x LVDS header 17.1 x LCD inverter connector 18.1 x Clear CMOS jumper
|
|
Back Panel Connectors 1.1 x DC In power connector 2.2 x serial ports 3.1 x D-Sub port 4.1 x HDMI port 5.4 x USB 2.0/1.1 ports 6.2 x USB 3.0/2.0 ports 7.1 x RJ-45 port 8.3 x audio jacks (Line In, Line Out, Mic In)
|
|
I/O Controller 1.iTE I/O Controller Chip
|
|
H/W Monitoring 1.System voltage detection 2.CPU/System temperature detection 3.CPU/System fan fail warning 4.CPU/System fan speed detection 5.CPU/System fan speed control ( Whether the fan speed control function is supported will depend on the cooler you install. )
|
|
BIOS 1.1 x 64 Mbit flash 2.Use of licensed AMI UEFI BIOS 3.PnP 1.0a, DMI 2.7, WfM 2.0, SM BIOS 2.7, ACPI 5.0
|
|
Operating System 1.Support for Windows 10 32-bit/64-bit 2.Support for Windows 8.1/7 64-bit ( Please download the "Windows USB Installation Tool" from GIGABYTEs website and install it before installing Windows 7.)
|
|
Form Factor Mini-ITX Form Factor 17.0cm x 17.0cm
|
|
Item Dimension (L inchxW inchxH inch) 9 x 8 x 3
Weight 2.00lb
Warranty Information 3 years
|
|
|
|