FSP Power Supply FSP300-50FCB 300W +5V/+12V 80 Plus Gold 47 to 63Hz UL62368 Non-modular Bulk Pack
Images shown for reference only
Shipping Extra
ATACOM Part #:POWS_FSPX_21_0T
Manufacturer Part #:FSP300-50FCB
Price: $175.95
WATTAGE 300W
GENERAL SPECIFICATION Efficiency 115VAC: Full load (100%) 87% Typical load (50%) 90% Light load (20%) 87% 230VAC: Full load (100%) 87% Typical load (50%) 90% Light load (20%) 87%
INPUT ELECTRICAL SPECIFICATION Input Frequency 47 to 63 Hz Input Current 115V at 6 Amps rms maximum 230V at 3 Amps rms maximum
OUTPUT SPECIFICATION Hold-up time 115V / 60Hz : is more than or equal to 10ms 230V / 50Hz : is more than or equal to 12ms Ripple and Noise Load 1 - 7 +5V: 7.48A 3.74A 1.5A 14A 8A 0A 0A +12V: 18.62A 9.31A 3.72A 0.1A 10A 24A 0.1A Over Current Protection 5V 25 to 45A Short Circuit Protection Load < 0.1 Ohm
ENVIRONMENTAL REQUIREMENT Temperature Range Operating: 0 to +50 deg. Storage: -40 to +80 deg. C Humidity Operating: 85% RH, Non-condensing Storage: 95% RH, Non-condensing MTBF The power supply have a minimum predicted MTBF(MIL-HDBK-217) of 100,000 hours of continuous operation at 25oC, maximum-output load, and nominal AC input voltage.
SAFETY CE FCC OCP SCP
AC INPUT 100-240V-,6-3A,60-50HZ DC OUTPUT +3.3V 12.0A MAX WATTAGE : 70W MAX +5V 14.0A MAX WATTAGE : 70W MAX +12VA 25.0A +5Vsb 3.0A -12V 0.3A TOTAL OUTPUT CONTINUOUS SHALL NOT EXCEED 300W
FEATURES 80 Plus Gold Low Ripple and Noise Output over voltage protection Short circuit protection on all outputs Resettable power shut down INTERNAL 4 cm fan 100% burn-in under high ambient temperature(50oC) Vacuum-impregnated transformer MTBF:100K hours at 25oC 100% Hi-pot tested Line input fuse protection
Item Dimension (L"xW"xH") 25 x 11 x 9 Weight 26.00 LB Warranty Information 3 year