|
|
Supermicro AS-2122TC-DL6RF4 2U Rackmount AMD Opteron 4000 A+ Server 2-Node, DDR3, 2x PCI-E X8, 4x GBLAN, IPMI, 24x Hot-Swap 2.5 Inch HDD, SAS, SATA 3G, RAID, VGA, w/ H8DCT-HLN4F, CSE-217HD-R1K28BP: AS-2122TC-DL6RF4
|
|
Images shown for reference only
|
|
|
Supermicro AS-2122TC-DL6RF4 2U Rackmount AMD Opteron 4000 A+ Server 2-Node, DDR3, 2x PCI-E X8, 4x GBLAN, IPMI, 24x Hot-Swap 2.5 Inch HDD, SAS, SATA 3G, RAID, VGA, w/ H8DCT-HLN4F, CSE-217HD-R1K28BP: AS-2122TC-DL6RF4 w/ H8DCT-HLN4F, CSE-217HD-R1K28BP: AS-2122TC-DL6RF4
|
|
|
|
| Shipping Extra
|
|
| ATACOM Part #: SYA2_SUPE_21_12
|
|
Price: $2295.00
|
|
|
|
|
 | Model | | Brand | Supermicro | | AS-2122TC-DL6RF4 | A+ Server 2122TC-DL6RF4 (Black) | | Motherboard | Super H8DCT-HLN4F | | Processor/Cache | | CPU | Dual 1207-pin Socket C32
Supports two 8/6/4-Core ready AMD Opteron™ 4000 Series processors
HT3.0 Link support | | Chipset QPI | AMD chipset SR5670 + SP5100
Note
Supports 4000 series processors with Max ACP 75W (TDP 95W) - | | System Memory | | Memory Capacity | 12 DIMM sockets
Support up to 192GB Registered ECC DDR3 1600/1333/1066 SDRAM in 12 DIMMs
Dual channel memory bus
For Dual CPUs: Recommended that memory be populated equally in adjacent memory banks | | Memory Type | DDR3 1600/1333/1066 MHz Registered ECC or Unbuffered ECC/non-ECC SDRAM 72-bit, 240-pin gold-plated DIMMs | | DIMM Sizes DIMM sockets | 1GB, 2GB, 4GB, 8GB, 16GB - | | Memory Voltage | 1.35V or 1.5V | | Error Detection | Corrects single-bit errors
Detects double-bit errors (using ECC memory) | | On-Board Devices | | Chipset | - | | SAS | LSI 6Gbps SAS 2008 IT Mode | | SATA | AMD SP5100 (RAID 0, 1, 10) | | IPMI | Support for Intelligent Platform Management Interface v.2.0
IPMI 2.0 with virtual media over LAN and KVM over LAN support
Winbond® WPCM450 BMC | | Network Controllers | Intel® I350 Quad Gigabit Ethernet LAN controller
10/100/1000BASE-T support | | VGA | Matrox G200 16MB DDR2 | | Super I/O | Winbond® W83527 chip | | Input / Output | | KVM | - | | SATA SAS | 6x SATA (3Gb/s) ports Integrated LSI 2008 IT Mode SAS2 RAID Controller | | LAN | 4 RJ45 LAN ports
1 RJ45 Dedicated LAN supports IPM | | USB | 4x USB 2.0 ports
2x Rear, 1x header (2 ports) | | VGA | 1x VGA port | | Serial Port /Header IPMI | 1x Fast UART 16550 serial port - | | Chassis | | Form Factor | 2U Rackmount | | Model | CSE-217HD-R1K28BP | | Dimensions | | Form Factor | 3.5" x 17.25" x28.5" (H x W x D) | | Gross Weight | 85 lbs / 38.6 kg | | Front Panel | | Buttons | 4x Power On/Off button
4x UID button | | LEDs | 4x Power status LED
4x UID LED
4x Network activity LEDs
4x System overheat / fan failed /
power failed LED | | Expansion Slots | | PCI-Express | 1x PCI-E 2.0 x16, 1x PCI-E 2.0 x8 in x4 (for SAS adapter card support) | | Drive Bays | | HDD Bay | 24x Hot-swap 2.5" HDD
(12 for each node) | | Peripheral Drives | | DVD-ROM | - | | Backplane | | SAS / SATA Backplane | - | | System Cooling | | Fans Shroud | 4x 80mm PWM cooling fans - | | PSU | | Power Supply | 1280W Redundant High-efficiency Digital Power Supplies w/ PMBus 1.2
AC Input
1000W Output @ 100-140V, 12-8A, 50-60Hz
1280W Output @ 180-240V, 8-6A, 50-60Hz
DC Output
1000W: +12V/83A; +5Vsb/4A
1280W: +12V/106.7A, +5Vsb/4A
Certification
Platinum Certified
[ Test Report ]
| | Two hot-pluggable systems (nodes) in a 2U form factor. Each node supports the following:
1. Dual AMD Opteron™ 4000 series
(4300 ready) processors (Socket C32)
8/6/4-Core ready; HT3.0 Link support
2. Up to 192GB DDR3 1600MHz ECC
Registered DIMM; 12x DIMM sockets
3. 2 (x8) PCI-E 2.0 (in x16, low-profile)
4. Intel® I350 (Powerville) Quad
Gigabit Ethernet LAN controller
5. 12x 2.5" Hot-swap SAS2/SATA/SSD
HDDs (24 total)
6. LSI 6Gbps SAS 2008 IT Mode
7. 1280W High-Efficiency Platium Level
Redundant Power Supplies (94%
Efficiency)
8. IPMI 2.0 with dedicated LAN |
|
