| Model |
| Brand | Supermicro |
| AS-2042G-TRF | A+ Server 2042G-TRF (Black) |
| Motherboard | Super H8SGL-F |
| Processor/Cache |
| CPU | Quad 1944-pin Socket G34 Supports up to four Twelve/Eight-Core ready AMD Opteron™ 6100 Series processors HT3.0 Link support |
| Chipset | AMD SR5690/SR5670/SP5100 Chipset |
| System Memory |
| Memory Capacity | Thirty-Two DIMM sockets Support up to 512GB DDR3 Reg. ECC 1333/1066/800 MHz memory or 128GB of DDR3 Unb. ECC/non-ECC memory Quad channel memory bus For Dual or Quad CPUs: Recommended that memory be populated equally in adjacent memory banks |
| Memory Type | Registered ECC or unb. ECC / non-ECC DDR3 1333/1066/800 MHz SDRAM 72-bit, 240-pin gold-plated DIMMs |
| DIMM Sizes | 16GB, 8GB, 4GB, 2GB, 1GB |
| Memory Voltage | 1.35V or 1.5V |
| Memory Voltage | Corrects single-bit errors Detects double-bit errors (using ECC memory) |
| On-Board Devices (per Node) |
| SATA | AMD SP5100 (RAID 0, 1, 10) |
| IPMI | Support for Intelligent Platform Management Interface v.2.0 IPMI 2.0 with virtual media over LAN and KVM over LAN support Winbond® WPCM450 BMC |
| Network Controllers | Intel® 82576 controller, Dual-Port Gigabit Ethernet 10/100/1000BASE-T support |
| VGA | Matrox G200 16MB DDR2 |
| Super I/O | Winbond® W83527 chip |
| Input / Output (per Node) |
| LAN | 2 RJ45 LAN ports 1 RJ45 Dedicated LAN supports IPMI |
| Serial ATA | 6x SATA2.0 (3Gb/s) Ports |
| USB | 7x USB 2.0 ports 2x Rear, 4x internal header , 1x TypeA |
| VGA | 1x VGA Port |
| Keyboard / Mouse | PS/2 keyboard and mouse ports |
| Serial Ports | 1x Fast UART 16550 serial port 1x serial port header |
| Chassis |
| Form Factor | 2U Rackmount |
| Model | SC828TQ+-R1400LPB |
| Dimensions |
| Form Factor | 3.5" x 17.2 " x 27.9" (H x W x D) |
| Front Panel (per Node) |
| Buttons | Power On/Off button System Reset button |
| LEDs | Power status LED HDD activity LED 2x Network activity LEDs system Overheat LED Power fail LED |
| Ports | 2x USB Ports + DB9 COM Port (optional) |
| Expansion Slots (per Node) |
| PCI-Express | 1x PCI-E 2.0 x16 slot |
| Drive Bays (per Node) |
| Hot-Swap | 6x 3.5" SATA Hot-swap drive trays Enterprise SATA HDD only recommended |
| Backplane |
| SAS / SATA Backplane | 1x 2U SAS / SATA backplane w/ SES-II |
| System Cooling |
| Fans | 6x 80mm 6500 RPM fans |
| PSU |
| Power Supply | Redundant 1400W high-efficiency power supply with PMBus |
