|
|
Supermicro SYS-1027TR-TQF 2 Node, C602J, Dual XEON E5-2600 LGA2011, 4x 2.5 Hot-Swap HDD, DDR3, 2x GBLAN, IPMI, SATA 3G, Infiniband, 1280W PSU w/ X9DRT-IBQF, CSE-809BTQ-1K28B Barebone SuperServer: SYS-1027TR-TQF
|
|
Images shown for reference only
|
|
|
Supermicro SYS-1027TR-TQF 2 Node, C602J, Dual XEON E5-2600 LGA2011, 4x 2.5 Hot-Swap HDD, DDR3, 2x GBLAN, IPMI, SATA 3G, Infiniband, 1280W PSU w/ X9DRT-IBQF, CSE-809BTQ-1K28B Barebone SuperServer: SYS-1027TR-TQF
|
|
|
|
| Shipping Extra
|
|
ATACOM Part #: SYI1_SUPE_10_26
Manufacture Part#: SYS-1027TR-TQF |
|
Price: $2926.95
|
|
|
|
|
| Model | | Brand | Supermicro | | SYS-5018A-TN4 | SuperServer 1027TR-TQF (Black) | | Motherboard | Super X9DRT-IBQF -B | | Processor/Cache | | CPU | Dual Socket R (LGA 2011) Intel® Xeon® processor E5-2600
and E5-2600 v2 family
(up to 130W TDP) |
| Note |
† BIOS version 3.0 or above is required |
| Cache |
Up to 30MB |
| System Bus |
QPI up to 8 GT/s |
| QPI | - | | System Memory | | Memory Capacity | 8x 240-pin DDR3 DIMM sockets
Up to 512GB DDR3 ECC LRDIMM
Up to 256GB DDR3 ECC Registered memory (RDIMM)
Up to 64GB DDR3 ECC and non-ECC UDIMM | | Memory Type | 1866/1600/1333/1066/800MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs | | DIMM Sizes | 32GB, 16GB, 8GB, 4GB, 2GB, 1GB | | Memory Voltage | 1.5 V, 1.35 V | | Error Detection | Corrects single-bit errors
Detects double-bit errors (using ECC memory) | | On-Board Devices | | GPU | Matrox G200eW | | Chipset | Intel® C602J Chipset | | SATA | Via Cable for SATA controller
SATA 2.0 (3Gbps) & 3.0 (6Gbps) with RAID 0, 1, 5, 10 | | IPMI | Support for Intelligent Platform Management Interface v.2.0
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
Nuvoton WPCM450 BMC | | Network Controllers | ntel® i350 Dual Port Gigabit Ethernet
Virtual Machine Device Queues reduce I/O overhead
Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
1x Realtek RTL8201N PHY (dedicated IPMI) | | USB 3.0 | Renesas uPD720201 | | Super I/O | - | | Clock Generator | - | | Input / Output | | Serial ATA | 2x SATA 3.0 ports (6Gbps)
4x SATA 2.0 ports (3Gbps) | | LAN | 2x RJ45 Gigabit Ethernet LAN ports
1x RJ45 Dedicated IPMI LAN port | | USB | 3x USB 2.0 ports (2x rear + 1x Type A) | VGA | 1x VGA Port | | Serial Port Others | 1x Fast UART 16550 ports (rear/header)
Infiniband
1x external QSFP Infiniband connector | | System BIOS | | BIOS Type | 128Mb SPI Flash EEPROM with AMI BIOS | | BIOS Features | Plug and Play (PnP)
APM 1.2
PCI 2.3
ACPI 1.0 / 2.0 / 3.0 / 4.0
USB Keyboard support
SMBIOS 2.7.1
UEFI |
| Chassis | | Form Factor | 1U Rackmount | | Model | CSE-809BTQ-1K28B | | Dimensions | | Form Factor | 17.2" (437mm) x 1.7" (43mm) x 27.75" (705mm) | | Gross Weight | 40 lbs (18.1kg) | | Front Panel | | Buttons | Power On/Off button
UID button | | LEDs | Power status LED
HDD activity LED
Information LED
2x Network activity LEDs
Universal Information (UID) LED | | Expansion Slots | | PCI-Express | 1x PCI-E 3.0 x16 Low-profile | | Drive Bays | | Hot-Swap | 4x 2.5" Hot-swap SATA HDD trays | | Backplane | | Backplane | 1x 1U SAS / SATA backplane | | System Cooling | | Fans | 3x 4cm counter-rotating fans w/ optimal fan speed control | | Power Supply | | Power Supply | 1280W High-Efficiency (95%+) power supply | | AC Input | 1000W Output @ 100-140V, 12-8A, 50-60Hz
1280W Output @ 180-240V, 8-6A, 50-60Hz | DC Output
+5V standby | 1000W: +5Vsb/4A
1280W: +5Vsb/4A | | DC Output +12V | 1000W: +12V/83A
1280W: +12V/106.7A |
| |
Key Features
1. Dual socket R (LGA 2011) supports Intel® Xeon® processor E5-2600 and E5-2600 v2 family†
2. Up to 512GB ECC DDR3, up to 1866MHz; 8x DIMM sockets
3. Expansion slots: 1x PCI-E 3.0 x16 LP
4. I/O ports: 1 VGA, 1 COM, 2 GbE LAN,2 USB 2.0 ports, 1 dedicated LAN for system management, 1 InfiniBand port
with Connect-X QDR speed
5. 4x 2.5" Hot-swap SATA HDD Bays(2x SATA3 and 2x SATA2)
6. 1280W Digital Switching Power Supply Platinum Level (95%)
|
|
