| Model |
| Brand | Supermicro |
| SYS-1027R-WC1R | SuperServer 1027R-WC1R (Black) |
| Motherboard | Super X9DRW-CF31 |
| Processor/Cache |
| CPU | Dual Socket R (LGA 2011)
Intel® Xeon® processor E5-2600
and E5-2600 v2 family†
(up to 130W TDP)
Note † BIOS version 3.0 or above is required
Cache
Up to 30MB |
| QPI GPU/Xeon Phi Support | up to 8 GT/s - |
| System Memory |
| Memory Capacity | 16x 240-pin DDR3 DIMM sockets
Up to 1TB DDR3 ECC LRDIMM
Up to 512GB DDR3 ECC Registered memory (RDIMM)
Up to 192GB DDR3 ECC and non-ECC UDIMM |
| Memory Type | 1866/1600/1333/1066/800MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs |
| DIMM Sizes | 32GB, 16GB, 8GB, 4GB, 2GB, 1GB |
| Memory Voltage | 1.5 V, 1.35 V |
| Error Detection | Corrects single-bit errors
Detects double-bit errors (using ECC memory) |
| On-Board Devices |
| SAS | SAS3 (12Gbps) via LSI 3108
RAID 0, 1, 5, 6, 10, 50, 60 support
2GB DDR3 Cache |
| Chipset | Intel® C602J Chipset |
| SATA | SATA3 (6Gbps) with RAID 0, 1 |
| IPMI | Support for Intelligent Platform Management Interface v.2.0
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
Renesas SH7757 BMC |
| Network Controllers | Intel® i350 Dual Port Gigabit Ethernet Controller
Virtual Machine Device Queues reduce I/O overhead
Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
1x Realtek RTL8211E PHY (dedicated IPMI) |
| Graphics | G200 (Nuvoton WPCM450 BMC) |
| Super I/O | - |
| Clock Generator | - |
| Input / Output |
| Serial ATA | 2x SATA3 (6Gbps) ports |
| SAS | 8x SAS3 (12Gbps) ports |
| USB | 6x USB 2.0 ports total (4 rear, 2 front) |
| LAN | 2x RJ45 Gigabit Ethernet LAN ports
1x RJ45 Dedicated IPMI LAN port |
| Video Serial Port Software Power Configurations | 1x VGA Connector 1x Fast UART 16550 header SuperDoctor® III
Watch Dog
NMI
SMCBU and SMM
IPMI 2.0
Intel Node Manager ACPI / APM Power Management
Power-on mode for AC power recovery |
| System BIOS |
| BIOS Type | 128Mb SPI Flash EEPROM with AMI BIOS |
| BIOS Features | Plug and Play (PnP)
APM 1.2
PCI 2.3
ACPI 1.0 / 2.0 / 3.0 / 4.0
BIOS resuce hot keys
USB Keyboard support
SMBIOS 2.7.1
UEFI 2.3.1 |
| Chassis |
| Form Factor | 1U Rackmount |
| Model | CSE-116AC-R700WB |
| Dimensions |
| Form Factor | 1.7" x 17.2 " x 23.5" (H x W x D) |
| Gross Weight | 48 lbs (20.9 kg) |
| Front Panel |
| Buttons | Power On/Off button
System Reset button |
| LEDs | Power status LED
HDD activity LED
2x Network activity LEDs
Universal Information (UID) LED |
| Expansion Slots |
| PCI-Express | 2 PCI-E 3.0 x16 full-height, Half-length slots
UIO AOC Compatibility Matrix
(Both CPUs need to be installed for full access to PCI-E slots and onboard controllers. See manual block diagram and AOC Support for details.)
|
| Drive Bays |
| Hot-Swap | 10 Hot-swap 2.5" SAS / SATA HDD trays (connected to onboard storage controller) |
| Backplane |
| Backplane | SAS/SATA HDD Backplane |
| System Cooling |
| Fans | 6x 40x56mm Counter-rotating PWM Fans |
| Power Supply |
| Power Supply | 700W/750W Redundant AC-DC high-efficiency power supply with PMBus and I2C |
| AC Input | 700W: 100 - 140 V, 50-60 Hz, 8.5-6 Amp
750W: 180 - 240V, 60-50 Hz, 5-3.8 Amp |
| DC Output | DC Output +5V standby 3 Amp
DC Output +12V
700W: 58 Amp @ 100-140V
750W: 62 Amp @ 180-240V |
| Certification | 80 plus gold certified |
