| Model |
| Brand | Supermicro |
| SYS-1026T-T | SuperServer 1026T-T (Black) |
| Motherboard | Super X8DTL-i |
| Processor/Cache |
| CPU | Dual 1366-pin LGA Sockets Supports up to two Intel® 64-bit Xeon® processor(s) of the same type below: - Intel® Xeon® Processor
X5600/E5600/L5600 Series(Westmere) 40W - 130W - Intel® Xeon® Processor
X5500/E5500/L5500 SeriesNehalem-EP) 38W - 95W |
| QPI | up to 6.4 GT/s |
| System Memory |
| Memory Capacity | 6x 240-pin DIMM sockets Supports up to 48 GB 1333 / 1066 /
800MHz DDR3 ECC Registered memory Supports up to 24 GB 1333 / 1066 / 800MHz DDR3 ECC / Non ECC Unbuffered memory Memory Mirroring supported |
| Memory Type | 1333 / 1066 / 800MHz ECC Registered / ECC or Non ECC Unbuffered DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs |
| DIMM Sizes | 1GB, 2GB, 4GB, 8GB |
| Memory Voltage | 1.5 V / 1.35V |
| Error Detection | Corrects single-bit errors Detects double-bit errors (using ECC memory) Supports Intel® x4 and x8 Single Device Data Correction (SDDC) |
| On-Board Devices (per Node) |
| Chipset | Intel® 5500 (Tylersburg) chipset ICH10R + IOH-24D |
| Infiniband | - |
| SATA | Intel ICH10R SATA 3.0Gbps Controller
RAID 0, 1, 5, 10 support |
| Network Controller | 2x Intel® 82574L Gigabit Ethernet Controllers Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output |
| IPMI | - |
| Graphics | Matrox G200eW |
| Super I/O | Winbond 83827HF chip |
| Input / Output (per Node) |
| LAN | 2x RJ45 LAN ports |
| Serial ATA | Six Serial ATA ports Six SATA hard drives supported |
| USB | 2x USB rear ports 1x USB on-board 2x USB internal headers Total 6 USB 2.0 Compliant |
| VGA | 1x VGA Port |
| Keyboard /Mouse | PS/2 keyboard and mouse ports |
| Serial Port /Header | 1 Fast UART 16550 serial port 1 Fast UART 16550 serial header
(Option) |
| Chassis |
| Form Factor | 1U Rackmount |
| Model | CSE-111TQ-560CB |
| Dimensions |
| Form Factor | 1.7" x 16.8" x 21.95" (H x W x D) |
| Gross Weight | 40 lbs (18.1kg) |
| Front Panel (per Node) |
| Buttons | Power On/Off button System Reset button |
| LEDs | Power status LED HDD activity LED 2x Network activity LEDs |
| Expansion Slots (per Node) |
| PCI-Express | 1 (x8) PCI-E 2.0 slot |
| Drive Bays (per Node) |
| Hot-Swap | 4x 2.5" Hot-swap SAS / SATA drive bays |
| Peripheral Drives(per Node) |
| Hot-Swap | Slim DVD-ROM drive (optional) |
| SATA Backplane |
| SAS / SATA Backplane | 1x SAS / SATA Backplane |
| System Cooling |
| Fans | 3x 40x56mm Counter Rotating Fans
2x 40x28mm fans for add-on card
(optional) |
| PSU |
| Power Supply | 560W AC to DC power supply w/ PFC |
