| Product SKUs |
| SuperServer 1016T-M3FB (Black) |
| Motherboard |
| Super X8STi-3F |
| Processor/Cache |
| CPU | LGA 1366 Socket Intel® Core™ i7-965 processor Extreme Edition (3.2 GHz) Intel® Core™ i7-940 processor (2.93 GHz) Intel® Core™ i7-920 processor (2.66 GHz) Supports future Intel® Nehalem processor families |
| System Bus | QPI (up to 6.4 GT/s) |
| Operating System Software | - |
| System Memory |
| Memory Capacity | Supports up to 24 GB 1333 / 1066 / 800MHz DDR3 ECC / non-ECC Un-Buffered memory Three Channel memory bus 6 DIMM sockets |
| Memory Type | 1333 / 1066 / 800MHz Un- Buffered ECC / non-ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs |
| DIMM Sizes | 256MB, 512MB, 1GB, 2GB, 4GB |
| Memory Voltage | 1.5 V |
| Error Detection | Corrects single-bit errors Detects double-bit errors (using ECC memory) Supports Intel® x4 and x8 Single Device Data Correction (SDDC) |
| On-Board Devices |
| Chipset | Intel® X58 Express chipset ICH10R |
| SAS | LSI SAS1068E RAID 0, 1, 10 support (Optional: AOC-IButton68) RAID 5 support |
| SATA | Intel ICH10R SATA (3.0Gbps) Controller RAID 0, 1, 5, 10 support |
| IPMI | Support for Intelligent Platform Management Interface v.2.0 IPMI 2.0 with virtual media over LAN and KVM-over-LAN support Winbond® WPCM450 BMC |
| Network Controllers | 2x Intel® Gigabit Ethernet Controllers Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output 1x Realtek RTL8201N PHY (dedicated IPMI) |
| Super I/O | Winbond 83627DHG chip |
| Clock Generator | CK505 |
| Expansion Slots |
| PCI-Express | 1 (x8) PCI-e slot |
| Input / Output |
| SAS | 8 SAS / SATA ports |
| Serial ATA | Six SATA ports Six SATA hard drives supported |
| Floppy | 1 1 Floppy controller; 1.44 MB |
| LAN | 2x RJ45 LAN port |
| USB | 2x USB rear ports 2x USB on-board 21x USB internal header(4 ports) Total 8 USB 2.0 Compliant |
| VGA | 1x VGA Port |
| Keyboard / Mouse | PS/2 keyboard and mouse ports |
| Serial Ports | 1x Fast UART 16550 serial port 1x internal header |
| Parallel Port | - |
| Chassis |
| Form Factor | 1U Rackmount |
| Model | CSE-113MTQ-360CB |
| Dimensions |
| Height | 1.7" (43mm) |
| Width | 17.2" (437mm) |
| Depth | 20" (508mm) |
| Gross Weight | 10 lbs (4.5kg) |
| Available Colors | Black |
| Front Panel |
| Buttons | Power On/Off button System Reset button |
| LEDs | Power status LED HDD activity LED 2x Network activity LEDs |
| Ports | none |
| Drive Bays |
| Hot-swap | 8x 2.5" Hot-swap SAS / SATA drive bays |
| Peripheral Drives |
| Floppy | 3.5" 1.44MB Floppy Drive |
| CD-ROM | Slim 24x CD-ROM drive |
| SATA Backplane |
| Backplane | 1x SAS / SATA Backplane |
| System Cooling |
| Fans | 4x 40x28mm high-efficiency fans 6x fans maximum |
| Power Supply |
| 360W AC power supply w/ PFC |
| AC Voltage | 100-240 V, 50-60 Hz, 4.8-2.7 Amp |
| DC Output | - |
| +5V | 20 Amp |
| +5V standby | 4 Amp |
| +12V | 29 Amp @ 100-140Vac,
32.5 Amp @ 180-240 Vac |
| -12V | 0.5Amp |
| +3.3V | 20 Amp |
| PC Health Monitoring |
| CPU | - Monitors for CPU Cores, +1.8V, +3.3V, +5V, ±12V, +3.3V Standby, +5V Standby, VBAT, HT, Memory, Chipset Voltages.
- 6-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V
|
| FAN | Total of six fan headers supporting up to 6 fans Six 4-pin fan headers 6x fans with tachometer status monitoring Status monitor for speed control Status monitor for on/off control Support 3-pin fans (w/o speed control) Low noise fan speed control Pulse Width Modulated (PWM) fan connectors |
| Temperature | Monitoring for CPU and chassis, environment CPU thermal trip support Thermal Control for 6x Fan Connectors I2C temperature sensing logic Thermal Monitor 2 (TM2) support |
| LED | CPU / System Overheat LED +5V Standby alert LED |
| Other Features | Chassis intrusion detection Chassis intrusion header |
| System BIOS |
| BIOS Type | 4Mb SPI Flash EEPROM with AMI BIOS |
| BIOS Features | DMI 2.3 PCI 2.2 ACPI 1.0 / 2.0 USB Keyboard support SMBIOS 2.3 |
