| Model |
| Brand | Supermicro |
| Product SKUs |
SuperServer 2027PR-DTTR
(Black) |
| Motherboard | Super X9DRT-PT |
| Processor/Cache |
| CPU | Dual Socket R (LGA 2011)
Intel® Xeon® processor E5-2600
and E5-2600 v2 family†
(up to 135W TDP) |
| Note |
† BIOS version 3.0 or above is required |
| Cache |
Up to 30MB |
| System Bus | QPI up to 8 GT/s |
| System Memory |
| Memory Capacity |
- 16x 240-pin DDR3 DIMM sockets
- Up to 1TB DDR3 ECC LRDIMM
- Up to 512GB DDR3 ECC Registered memory (RDIMM)
|
| DIMM Type | 1866/1600/1333/1066/800MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs |
| DIMM Sizes |
- 32GB, 16GB, 8GB, 4GB, 2GB, 1GB
|
| Memory Voltagel |
|
| Error Detection |
- Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
|
| On Board Devices |
| Chipset |
|
| SATA |
- SATA3 (6Gbps) w/ RAID 0, 1, 10
- SATA2 (3Gbps) w/ RAID 0, 1, 10
|
| IPMI |
- Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
- Nuvoton WPCM450 BMC
|
| Network Controllers |
- Intel® i540 Dual Port Gigabit Ethernet
- Virtual Machine Device Queues reduce I/O overhead
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
- 1x Realtek RTL8201N PHY (dedicated IPMI)
|
| Graphics |
|
| Input / Output (Per Node) |
| ACHI SATA |
- 2x SATA3 (6Gbps) ports
- 4x SATA2 (3Gbps) ports
|
| SCU SATA |
|
| LAN |
- 2x RJ45 10GBase-T ports
- 1x RJ45 Dedicated IPMI LAN port
|
| USB |
- 2x USB 2.0 ports total (2x rear)
|
| VGA |
|
| Serial Port / Header |
1x Fast UART 16550 port / 1 Header |
| Chassis |
| Form Factor |
|
| Model |
CSE-217HD-R1K28B |
| Dimentions |
| Width | |
| Height | |
| Depth | |
| Gross Weight |
|
| Available Colors |
|
| Front Panel |
| Buttons |
- Power On/Off button
- System Reset button
- UID button
|
| LEDs |
- Power status LED
- HDD activity LED
- 2x Network activity LEDs
- Universal Information (UID) LED
|
| Expansion Slots(Per Node) |
| PCI-Express |
- 1x PCI-E 3.0 (x16) Low-profile slot
- 1x PCI-E 3.0 (x8) Low-profile slot
|
| Drive Bays (Per Node) |
| Hot-swap |
- 8x 2.5" Hot-swap SATA HDD trays
|
| System Cooling |
| Fans |
- 4x 8cm heavy duty PWM fans with optimal fan speed control
|
| Power Supply |
| AC Input |
- 1000W Output @ 100-140V, 12-8A, 50-60Hz
- 1280W Output @ 180-240V, 8-6A, 50-60Hz
|
| DC Output |
- 1000W: +12V/83A; +5Vsb/4A
- 1280W: +12V/106.7A, +5Vsb/4A
|
| Note |
1280W Redundant High-efficiency Digital Power Supplies w/ PMBus 1.2 |
| Certification |
Platinum Certified
[ Test Report ] |
| System BIOS |
| BIOS Type |
- 128Mb SPI Flash EEPROM with AMI BIOS
|
| BIOS Features |
- Plug and Play (PnP)
- APM 1.2
- PCI 2.2
- ACPI 1.0 / 2.0
- USB Keyboard support
- SMBIOS 2.3
- UEFI
|
| Operating Environment/Compliance |
| RoHS |
|
| Opetraing Temperature |
10°C to 35°C (50°F to 95°F) |
| Non-operating Temperature |
-40°C to 70°C (-40°F to 158°F) |
| Operating relative Humidity |
8% to 90% (non-condensing) |
| Non-operating Humidity | 5% to 95% (non-condensing) |
