| Model |
| Brand | Supermicro |
| Motherboard |
Super X9DRT-PT |
| SYS-2027PR-HC0TR |
SuperServer 2027PR-HC0TR (Black) |
| Processor/Cache |
| CPU |
Dual Socket R (LGA 2011)
Intel® Xeon® processor E5-2600
and E5-2600 v2 family†
(up to 135W TDP *) |
| Cache |
Up to 30MB |
| System Bus |
QPI up to 8 GT/s |
| Note | † BIOS version 3.0 or above is required |
| System Memory |
| Memory Capacity | 16x 240-pin DDR3 DIMM sockets
Up to 1TB DDR3 ECC LRDIMM
Up to 512GB DDR3 ECC Registered memory (RDIMM) |
| Memory Type | 1866/1600/1333/1066/800MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs |
| DIMM Sizes | 32GB, 16GB, 8GB, 4GB, 2GB, 1GB |
| Memory Voltage | 1.5 V, 1.35 V |
| Error Detection | Corrects single-bit errors
Detects double-bit errors (using ECC memory) |
| On-Board Devices |
| Chipset | Intel® C606 Chipset |
| SAS | LSI 3008 SAS3 (12Gbps) controller;
RAID 0, 1, 10 support |
| IPMI |
Support for Intelligent Platform Management Interface v.2.0
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
Nuvoton WPCM450 BMC |
| Network Controllers | Intel® X540 Dual port 10GBase-T
Virtual Machine Device Queues reduce I/O overhead
Supports 10GBASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
1x Realtek RTL8201N PHY (dedicated IPMI) |
| Graphics | Matrox G200eW |
| Input / Output |
| SAS | 6x SAS3 (12Gbps) ports |
| LAN | 2x RJ45 10GBase-T ports
1x RJ45 Dedicated IPMI LAN port |
| USB | 2x USB 2.0 ports total (2x rear) |
| VGA |
1x VGA port |
| Serial Port | 1x Fast UART 16550 port / 1 Header |
| System BIOS |
| BIOS Type | 128Mb SPI Flash EEPROM with AMI BIOS |
| BIOS Features | Plug and Play (PnP)
APM 1.2
PCI 2.2
ACPI 1.0 / 2.0
USB Keyboard support
SMBIOS 2.3
UEFI |
| Chassis |
| Form Factor |
2U Rackmount |
| Model |
CSE-217HQ+-R2K02B |
| Dimensions |
| Available Colors |
Black |
| Gross Weight |
85 lbs (38.6kg) |
| Dimention | 17.25" (438mm) x 3.47" (88mm) x 28.5" (724mm) |
| Drive Bays (per node) |
| Hot-swapons |
6x2.5" Hot-Swap SAS/SATA HDD Trays |
| Front Panel |
| Buttons | Power On/Off button
System Reset button
UID button
6x 2.5" Hot-swap SAS/SATA HDD trays |
| LEDs | Power status LED
HDD activity LED
2x Network activity LEDs
Universal Information (UID) LED |
| Expansion Slots |
| PCI-Express | 1x PCI-E 3.0 x16 Low-profile slot |
| Operating Environment |
| Operating Temperature Range |
10°C to 35°C (50°F to 95°F) |
| Non-Operating Temperature Range |
-40°C to 70°C (-40°F to 158°F) |
| Operating Relative Humidity Range |
8% to 90% (non-condensing) |
| Non-Operating Relative Humidity Range |
5% to 95% (non-condensing) |
| RoHS 6/6 |
RoHS Compliant |
| Switching Power Supply |
| 2000W Redundant Power Supplies with I2C & PMBus |
AC Input
1100W Output @ 100-120V, 12.7-10.5A, 50-60Hz
1400W Output @ 120-140V, 13.5-11.5A, 50-60Hz
1800W Output @ 200-220V, 10.0-9.5A, 50-60Hz
1980W Output @ 220-230V, 10.0-9.8A, 50-60Hz
2000W Output @ 230-240V, 10.0-9.8A, 50-60Hz |
| 5Vsb |
4A |
| I2C Remote Monitoring |
FRU Data / SMBus / PMBus |
| Fan |
4x 8cm heavy duty PWM fans with optimal fan speed control |
