|
|
Supermicro SYS-6027TR-D71FRF 2U LGA2011 C602, 2 Node, 6x 3.5 Hot-Swap HDD, Infiniband, 2x GBLAN, 1280W Redundant PSU w/ X9DRT-HIBFF, CSE-827HD-R1K28B SuperServer
|
|
Images shown for reference only
|
|
|
Supermicro SYS-6027TR-D71FRF 2U LGA2011 C602, 2 Node, 6x 3.5 Hot-Swap HDD, Infiniband, 2x GBLAN, 1280W Redundant PSU w/ X9DRT-HIBFF, CSE-827HD-R1K28B SuperServer SYS-6027TR-D71FRF 2U LGA2011 C602, 2 Node, 6x 3.5 Hot-Swap HDD, Infiniband, 2x GBLAN, 1280W Redundant PSU w/ X9DRT-HIBFF, CSE-827HD-R1K28B SuperServer
|
|
|
|
| Shipping Extra
|
|
| ATACOM Part #: SYI2_SUPE_27_34
|
|
Price: $3402.95
|
|
|
|
|
 | Model | | Brand | Supermicro | | SYS-6027TR-D71FRF | SuperServer 6027TR-D71FRF (Black) | | Motherboard | Super X9DRT-HIBFF | | Processor/Cache | | CPU | Intel® Xeon® processor E5-2600 (up to 135W TDP *)
Dual Socket R (LGA 2011)
* Please contact your Supermicro sales representative for additional details | | Cache | Up to 20MB | | System Bus | QPI up to 8 GT/s | | System Memory | | Memory Capacity | 8x 240-pin DDR3 DIMM sockets
Supports up to 256 GB DDR3 ECC Registered memory (RDIMM) | | Memory Type | 1600/1333/1066/800MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs | | DIMM Sizes | 32GB, 16GB, 8GB, 4GB, 2GB, 1GB | | Memory Voltage | 1.5 V, 1.35 V | | Error Detection | Corrects single-bit errors
Detects double-bit errors (using ECC memory) | | On-Board Devices | | SAS | LSI 2108 SAS (6Gbps) w/ Hardware RAID support
RAID 0, 1, 5, 6, 10, 50, 60 support
Note: In order to support the LSI RAID Controllers, both CPU socket must be populated | | Chipset | Intel® C602 Chipset | | SATA | SATA 2.0 & 3.0 with RAID 0, 1, 5, 10 | | IPMI | Support for Intelligent Platform Management Interface v.2.0
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
Nuvoton WPCM450 BMC | | Infiniband | Mellanox ConnectX-3 FDR Infiniband 56Gbps Controller | | Network Controllers | Intel® i350 Dual Port Gigabit Ethernet
Virtual Machine Device Queues reduce I/O overhead
Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
1x Realtek RTL8201N PHY (dedicated IPMI) | | Graphics | Matrox G200eW | | Input / Output | | SATA/SAS | 2x SATA 3.0 ports (6Gbps)
5x SATA 2.0 ports (3Gbps) 8x SAS2 ports (6Gbps) | | LAN | 2x RJ45 Gigabit Ethernet LAN ports
1x RJ45 Dedicated IPMI LAN port | | USB | 3x USB 2.0 ports total
(2x rear + 1x Type A) | | VGA | 1x VGA Port | | Serial Port | 1x Fast UART 16550 port / 1 Header | | Infiniband | 1 external QSFP Infiniband connector | | System BIOS | | BIOS Type | 128Mb SPI Flash EEPROM with AMI BIOS | | BIOS Features | Plug and Play (PnP)
APM 1.2
PCI 2.2
ACPI 1.0 / 2.0
USB Keyboard support
SMBIOS 2.3
UEFI | | Chassis | | Form Factor | 2U Rackmount | | Model | CSE-827HD-R1K28B | | Dimensions | | Form Factor | 3.47" x 17.25 " x 28.5" (H x W x D) | | Gross Weight | 85 lbs (20.9kg) | | Front Panel | | Buttons | Power On/Off button
System Reset button
UID button | | LEDs | Power status LED
HDD activity LED
2x Network activity LEDs
Universal Information (UID) LED | | Expansion Slots | | PCI-Express | 3x PCI-E 3.0 (x8) slots (1x Low-profile and 2x Full-height Full-length) | | Drive Bays | | Hot-Swap | 6x Hot-swap 3.5" SATA3/SAS2 HDD trays | | Backplane | | Backplane | - | | System Cooling | | Fans | 4x 8cm heavy duty PWM fans with optimal fan speed control | | Power Supply | | Power Supply | 1280W Redundant High-efficiency Digital Power Supplies
w/ PMBus 1.2 | | AC Input | 1000W Output @ 100-140V, 12-8A, 50-60Hz
1280W Output @ 180-240V, 8-6A, 50-60Hz | | DC Output | - | | With Power Distributor | - | | | Key Features Two hot-pluggable systems (nodes) in a 2U form factor. Each node supports the following:
1. Intel® Xeon® processor E5-2600
family; QPI up to 8GT/s
2. Up to 256GB DDR3 1600MHz ECC
Registered DIMM; 8x DIMM sockets
3. 3x PCI-E 3.0 (x8) slots (1x low-profile
and 2x full-height full-length)
4. Intel® i350 Dual port Gigabit Ethernet
5. 6x Hot-swap 3.5" SATA3/SAS2
HDD Bays
6. Onboard Mellanox ConnectX FDR
InfiniBand Controller, QSFP interface
7. 1280W Redundant Power Supplies
80 PLUS, Platinum Level (94%) |
|
