| Model |
| Brand | Supermicro |
| SYS-6027AX-72RF | SYS-6027AX-72RF
SuperServer 6027AX-72RF (Black) |
| Motherboard | Super X9DAX-7F |
| Processor/Cache |
| CPU | Intel® Xeon® processor E5-2600 (up to 150W TDP)
Xeon E5-2643 (“HFT2”) Dual Socket R (LGA 2011) |
| Cache QPI | Up to 20MB up to 8 GT/s |
| System Memory |
| Memory Capacity | 16x 240-pin DDR3 DIMM sockets
Supports up to 512 GB DDR3 ECC Registered memory (RDIMM)
Supports up to 128 GB DDR3 ECC Un-Buffered memory (UDIMM) |
| Memory Type | 1600/1333/1066/800MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs |
| DIMM Sizes | 32GB, 16GB, 8GB, 4GB, 2GB, 1GB |
| Memory Voltage | 1.5 V / 1.35V |
| Error Detection | Corrects single-bit errors
Detects double-bit errors (using ECC memory)
Supports Intel® x4 and x8 Single Device Data Correction (SDDC) |
| On-Board Devices |
| SAS | SAS2 from LSI 2208
RAID 0, 1, 5, 6, 10, 50, 60 support |
| Chipset | Intel® C602 Chipset |
| SATA | SATA 2.0 3Gbps with RAID 0, 1, 5, 10
SATA 3.0 6Gbps with RAID 0, 1 |
| IPMI | Support for Intelligent Platform Management Interface v.2.0
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
Nuvoton WPCM450 BMC |
| Network Controllers | Intel® i350 Dual Port Gigabit Ethernet
Virtual Machine Device Queues reduce I/O overhead
Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
1x Realtek RTL8201N PHY (dedicated IPMI) |
| Graphics | Matrox G200eW |
| Audio | RealTek ALC889 7.1 High Definition Audio with S/PDIF header |
| Clock Generator | - |
| Input / Output |
| Serial ATA | 2x SATA 3.0 ports (6Gbps)
8x SATA 2.0 ports (3Gbps) |
| LAN | 2x RJ45 Gigabit Ethernet LAN ports
1x RJ45 Dedicated IPMI LAN port |
| USB | 4x USB 3.0 (2 front, 2 rear) and 4x USB 2.0 ports |
| VGA | 1x VGA Port |
| SAS | 8x SAS2 ports (6Gbps) |
| Audio | Line-in / Line-out / Microphone Ports |
| Keyboard / Mouse | - |
| Serial Port / Header | 2x Fast UART 16550 ports |
| System BIOS |
| BIOS Type | 128Mb SPI Flash EEPROM with AMI BIOS |
| BIOS Features | Plug and Play (PnP)
APM 1.2
PCI 2.2
ACPI 1.0 / 2.0
USB Keyboard support
SMBIOS 2.3
UEFI |
| Chassis |
| Form Factor | 2U Rackmount |
| Model | CSE-829BTQ-R1K28LPB |
| Dimensions |
| Form Factor | 3.5" x 17.2 " x 25.5" (H x W x D) |
| Gross Weight | 52 lbs (23.6kg) |
| Front Panel |
| Buttons | Power On/Off button
System Reset button |
| LEDs | Power status LED
Hard drive activity LED
2x Network activity LEDs
System Overheat LED
Power fail LED |
| Expansion Slots |
| PCI-Express | 2 PCI-E 3.0 x16 slots
3 PCI-E 3.0 x8 slots
1 UIO PCI-E 3.0 x8 (for SMC UIO) or
1 PCI-E 2.0 x4 (in x8) slot |
| Drive Bays |
| Hot-Swap | 10x Hot-swap 3.5" SAS/SATA HDD trays |
| Display |
| LCD Screen Backplane | Front panel LCD display (optional) 1x SAS2 / SATA backplane |
| System Cooling |
| Fans Heatsink | 4x PWM fans w/ optimal fan speed control Optional 2x Passive CPU Heat Sink (SNK-P2048P) |
| PSU |
| Power Supply | 1280W Redundant High-efficiency Digital Power Supplies
w/ PMBus 1.2 |
| AC Input | 1000W Output @ 100-140V, 12-8A, 50-60Hz
1280W Output @ 180-240V, 8-6A, 50-60Hz
DC Output
1000W: +12V/83A; +5Vsb/4A
1280W: +12V/106.7A, +5Vsb/4A
Certification
80 PLUS Platinum
[ Test Report ] |
| DC Output | - |
