| Model |
| Brand | Supermicro |
| SSG-6047R-E1R72L2K | SuperServer 6047R-TXRF (Black) |
| Motherboard | Super X9DR+-F |
| Processor/Cache |
| CPU | Dual Socket R (LGA 2011) Intel® Xeon® processor E5-2600 and E5-2600 v2 family† (up to 135W TDP *) |
| Note | † BIOS version 3.0 or above is required |
| Cache | Up to 30MB |
| System Bus | QPI up to 8 GT/s |
| System Memory (per Node) |
| Memory Capacity | 16x 240-pin DDR3 DIMM sockets Up to 1TB DDR3 ECC LRDIMM Up to 512GB DDR3 ECC Registered memory (RDIMM) Up to 192GB DDR3 ECC Un-Buffered memory (UDIMM) |
| Memory Type | 1866/1600/1333/1066/800MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs |
| DIMM Sizes | 32GB, 16GB, 8GB, 4GB, 2GB, 1GB |
| Memory Voltage | 1.5 V and 1.35V |
| Error Detection | Corrects single-bit errors Detects double-bit errors (using ECC memory) |
| On-Board Devices |
| Chipset | Intel® C602 Chipset |
| SATA | SATA2 (3Gbps) w/ RAID 0, 1, 5, 10 SATA3 (6Gbps) w/ RAID 0, 1, 5, 10 |
| SAS | SAS2 via LSI 2308; IT Mode / Pass-through |
| IPMI | Support for Intelligent Platform Management Interface v.2.0 IPMI 2.0 with virtual media over LAN and KVM-over-LAN support Renesas WPCM450 BMC |
| Network Controller | Intel® i350 Dual Port Gigabit Ethernet Virtual Machine Device Queues reduce I/O overhead Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output 1x Realtek RTL8201N PHY (dedicated IPMI) |
| Video Graphics | Matrox G200eW |
| Super I/O | Nuvoton W83527 |
| Input / Output |
| Serial ATA | 2 x SATA3 (6 Gbps) ports 8 x SATA2 (3 Gbps) ports |
| LAN | 2 x RJ 45 Gigabit Ethernet LAN ports 1 x RJ 45 Dedicated IPMI LAN port |
| USB | 10 x USB 2.0 ports total (4 x rear + 4 via header + 2 Type A) |
| VGA | 1x VGA port |
| Serial Port/Header | 2 x Fast UART 16550 ports (1 rear + 1 header) |
| Chassis |
| Form Factor | 4U Rackmountable/Tower Optional Rackmount Kit |
| Model | CSE-842XTQ-R606B |
| Dimensions |
| Form Factor | 17.2" x 7.0" x 20.5" (H x W x D) |
| Gross Weight | 47 lbs (21.3 kg) |
| Available Colors | Black |
| Front Panel |
| Buttons | Power On/Off button System Reset button |
| LEDs | Power status LED Hard drive activity LED 2x Network activity LEDs System Overhead LED Power fail LED |
| Ports | 2 x USB Ports |
| Expansion Slots |
| PCI-Express | 10 x PCI-E 3.0 x 8 1 x PCI-E 2.0 x 4 (in x 8) |
| Drive Bays |
| Hot-Swap | 5 x 3.5" Hot-swap Drive Trays |
| Peripheral Bay(s) [90o Rotatable] | 3x 5.25" Peripheral Drive Trays |
| SAS/SATA Backplane |
| SAS / SATA Hard Drive Backplane w/AMI MG9072 |
| System Cooling |
| Fans | 1x 92x38mm 4-pin PWM front intake fan 2x 80x38mm 4-pin PWM rear exhaust fans |
| Power Supply With Power Distributor |
| 600W high-efficiency redundant power supplies with PMBus |
| AC Input | 100-240 V, 50-60 Hz, 7.5-3.0 Amp |
| DC Output | 3 Amp @ +5V standby 50 Amp @ +12V s |
| With Power Distributor | +5V: 30 Amp +3.3V: 28 Amp -12V: 0.6 Amp |
| Certification | Platinum Certified |
| PC Health Monitor |
| CPU | Monitors for CPU Cores, +1.8V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory, Chipset Voltages. 6-Phase-switching voltage regulator |
| Fan | Total of eight fan headers supporting up to 8 fans 8x fans with tachometer status monitoring Status monitor for speed control Pulse Width Modulated (PWM) fan connectors |
| Temperature | Monitoring for CPU and chassis environment CPU thermal trip support Thermal Control for 8x fan connectors Thermal Monitor 2 (TM2) support PECI |
| LED | CPU / System Overheat LED Suspend static indicator LED UID/Remote LED |
| Other Features | Chassis intrusion detection Chassis intrusion header |
| System BIOS |
| BIOS System | 128Mb SPI Flash EEPROM with AMI BIOS |
| BIOS Features | Plug and Play (PnP) APM 1.2 PCI 2.2 ACPI 1.0/ 2.0 USB Keyboard support SMBIOS 2.3 UEFI |
| Operating Environment/Compliance |
| RoHS | RoHS Compliant |
| Environmental Spec. | Operating Temperature:10°C to 35°C (50°F to 95°F) Non-operating Temperature:-40°C to 70°C (-40°F to 158°F) Operating Relative Humidity:8% to 90% (non-condensing) Non-operating Relative Humidity:5% to 95% (non-condensing) |
