| Product SKUs |
| SYS-7046A-HR+F | SuperServer 7046A-HR+F (Black) |
| Motherboard | Super X8DAH+-F |
| Processor/Cache |
| CPU |
Dual 1366-pin LGA Sockets
Supports up to two Intel® 64-bit Xeon®processor(s) of the same type below:
Intel®
Xeon®Processor 5600 Series (Westmere)
Intel®
Xeon®Processor 5500 Series (Nehalem-EP)
|
| QPI | up to 6.4 GT/s |
| System Memory |
| Memory Capacity |
18x 240-pin DIMM sockets
Supports up to 288GB 1333 / 1066 / 800MHz DDR3 ECC Registered memory
Supports up to 48GB 1333 / 1066 / 800MHz DDR3 ECC / Non ECC Unbuffered memory
Memory Mirroring supported
|
| Memory Type | 1333 / 1066 / 800MHz ECC Registered / ECC Unbuffered DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs |
| DIMM Size | 1GB, 2GB, 4GB, 8GB,16GB |
| Memory Voltage |
1.5 V /1.35V |
| Error Detection |
Corrects single-bit errors
Detects double-bit errors (using ECC memory)
Supports Intel® x4 and x8 Single Device Data Correction (SDDC)
|
| Note |
This board does not support LRDIMM memory. Please refer to HERE for list of motherboards with LRDIMM support. |
| On-Board Devices |
| IPMI |
Support for Intelligent Platform Management Interface v.2.0
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
Nuvoton WPCM450 BMC
|
| SATA |
Intel ICH10R SATA 3.0Gbps Controller
RAID 0, 1, 5, 10 support
|
| Chipset |
Intel® 5520 (Tylersburg) chipset
ICH10R +2x IOH-36D
|
| Super I/O |
Winbond 83827HF chip
|
| Nerwork Controllers |
Intel® 82576 Dual-Port Gigabit Ethernet Controller
Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
Intel® I/OAT 3 support for fast, scaleable, and reliable networking
VMDq support for better performance of virtualization
1x Realtek RTL8201N PHY (dedicated IPMI)
|
| Audio |
Realtek ALC883 7.1 HD audio |
| Graphics |
Matrox G200eW |
| Input / Output |
| SATA |
6 Serial ATA ports
6 SATA hard drives supported
|
| IDE |
Single EIDE channel supports up to two UDMA IDE devices (IDE-M, IDE-S) including CF(Compact Flash) Card
Supports UDMA Mode 5, PIO Mode 4, and ATA/100
|
| Floppy |
1 Floppy controller; 1.44 MB
|
| LAN |
2 RJ45 LAN ports
1 RJ45 Dedicated IPMI LAN port
|
| USB |
6 USB rear ports
2 USB on-board
2 USB internal headers (4 ports)
Total 12 USB 2.0 Compliant
|
| Audio |
Realtek ALC883 7.1 HD audio |
| VGA |
1 VGA Port |
| Keyboard/Mouse |
PS/2 keyboard and mouse ports
|
| Serial Port/Header |
1 Fast UART 16550 serial port
1 Fast UART 16550 serial header (Option)
|
| IEEE 1394a |
2 IEEE 1394a ports (1x header) |
| System BIOS |
| BIOS Type | 32Mb SPI Flash EEPROM with AMI® BIOS |
| BIOS Features |
- Plug and Play (PnP)
- PCI 2.2
- ACPI up to 3.0
- USB Keyboard support
|
| Chassis |
| Form Factor |
- 4U Rackmountable / Tower
- Optional Rackmount Kit (CSE-PT26)
|
| Model | CSE-745TQ-R1400B |
| Dimensions |
| H x W x D |
7.0" x 17.2 " x 25.5" |
| Gross Weight |
63 lbs (28.6kg) |
| Available Colors |
Black |
| Front Panel |
| Buttons | Power On/Off button System Reset button |
| LEDs |
Power LED
Hard drive activity LED
2x Network activity LEDs
System Overheat / Fan Fail LED
Power Fail LED
|
| Ports |
2x USB Ports
|
| Expansion Slots |
| PCI-Express |
2 (x16) PCI-E 2.0 slots
4 (x8) PCI-E 2.0 slots (1 in x16 slot)
1 (x4) PCI-E slot
|
| Drive Bays |
| Hot-swap |
8x Hot-swap Drive Bays
Supports up to 6x SATA Hard Drives
|
| Peripheral Bay(s) |
3x 5.25" Peripheral Drive Bay |
| Blackplane |
| SATA/ SAS Backplane | SAS / SATA Backplane w/ Enclosure Management |
| System Cooling |
| Fans |
3x 5000 RPM Hot-Swappable Cooling Fans
2x 5000 RPM Hot-Swappable Rear Exhaust Fan
|
| Power Supply |
| Power Supply |
1400W high-efficiency (1+1) redundant power supply with PMBus |
| AC Input |
1100W Output @ 100-140V, 13.5-9.5A, 50-60Hz
1400W Output @ 180-240V, 9.5-7.0A, 50-60Hz
|
| DC Output |
1100W: +12V/92A; +5Vsb/4A
1400W: +12V/116A; +5Vsb/4A
|
| With Distributor |
+5V: 30 Amp
+3.3V: 24 Amp
-12V: 0.6 Amp
|
| Certification |
Gold Certified
|
| PC Health Monitoring |
| CPU |
Monitors for CPU Cores, +1.8V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory, Chipset Voltages.
6-Phase-switching voltage regulator
|
| FAN |
Total of eight fan headers supporting up to 8 fans
Eight 4-pin fan headers
8x fans with tachometer status monitoring
Support 3-pin fans (w/o speed control)
Low noise fan speed control (4-pin fan only)
|
| Temperature |
Monitoring for CPU and chassis environment
Thermal Control for 8x fan connectors
PECI
|
| Other Features |
Chassis intrusion detection
Chassis intrusion header
|
| System BIOS |
| BIOS Type |
32Mb SPI Flash EEPROM with AMI® BIOS |
| BIOS Features |
Plug and Play (PnP)
PCI 2.2
ACPI up to 3.0
USB Keyboard support
|
| Operating Environment / Compliance |
| RoHS |
RoHS Compliant
|
| Environmental |
Operating Temperature: 10°to 35°C (50°to 95°F)
Non-operating Temperature: -40°to 70°C (-40°to 158°F)
Operating Relative Humidity: 8% to 90% (non-condensing)
Non-operating Relative Humidity: 5 to 95% (non-condensing)
|
